Crimp Force Monitors & Terminal Testers

Eastontech's wire harness testing equipment verifies crimp quality and connection integrity throughout the production process. The range includes crimp force monitors (CFM) for real-time crimp quality tracking, electric terminal tensile testers rated up to 300kg/3000N for pull-force verification, terminal cross-section analyzers from 0.01mm² to 120mm² for crimp geometry inspection, and wire harness color sequence detectors for wiring accuracy checks. These instruments support quality control workflows aligned with IPC/WHMA-A-620 and SAE/USCAR-21 crimp inspection requirements.

Product Category: Cut; Crimp - Pneumatic - Electrical (0-4T) - Electrical (6-40T) - Strip Crimp - Seal Crimp; Cut&Strip - 0-35mm² - 50-400mm² - Rotary Strip - Bend - Inkjet/Laser Mark; Shield Process; Strip,Twist - Electrical - Pneumatic; Cut Strip Terminate& Solder - Housing/Tube Insertion - Seal Crimping - Heat Shrinkage/Sleeve Insertion - Tinning Crimping - Joint Crimping - Ferrule Crimping - Standard Crimping; Labeling Machine; Wind & Nylon Tying; Cable Solder& Weld Machine; Tape Bundling; Prefeeding& Deposit System; Plug Production; Heat Shrinkage; PVC Injection; Copper Belt Press; Tape Dispenser; Printing Marking; Wire Harness Tester & Assembly Table; Solar Cable Line; Moulds&Accessory

New information: Wire Stripping Tolerance: How Accuracy Affects Wire Processing Quality
2026/9/9 | News > Wire Harness Industry Blog; Wire Harness Automation for Automotive Wiring: A Practical Guide
2026/9/2 | News > Wire Harness Industry Blog; Optimizing Terminal Welding Quality: A Practical Guide to Ultrasonic Welding Parameters for Copper and Aluminum Wires
2026/8/27 | News > Company News; Bad Wire Crimp: Hidden Dangers and How to Avoid Defective Crimp Connections
2026/8/26 | News > Wire Harness Industry Blog; Wire Harness Color Codes & Electrical Terminology Reference
2026/8/22 | News > Wire Harness Industry Blog; What Is Ferrule Crimping and Why It Matters for Wire Termination
2026/8/19 | News > Wire Harness Industry Blog; Pneumatic vs Electrical Crimping: Which One Fits Your Production Line?
2026/8/12 | News > Wire Harness Industry Blog; Wire Gauge Selection Guide for Automotive Low-Voltage Harnesses
2026/8/5 | News > Wire Harness Industry Blog

EW-2505 Crimp Force Monitor (1–2 Channels / 20,000 Hz Sampling)

EW-2505 Crimp Force Monitor (1–2 Channels / 20,000 Hz Sampling)

Model:EW-2505 Precision:0.3 Output:Relay / pulse Channel number:1CH Sample rate:Max.2 0000 sample per second...

MORE

EW-2510 Electric Terminal Tensile Testing Machine (≤100 kg Load)

EW-2510 Electric Terminal Tensile Testing Machine (≤100 kg Load)

Model:EW-2510 Weight:14Kg Dimension:430*180*210(mm) Power:AC220V/50HZ 0.1KW Function:Wire pulling force tester...

MORE

EW-2510+P Electric Terminal Tensile Testing Machine + Printer

EW-2510+P Electric Terminal Tensile Testing Machine + Printer

Model:EW-2510+P Weight:14Kg Dimension:430*180*210(mm) Power:AC220V/50HZ 0.1KW Function:Wire pulling force tester ...

MORE

EW-2510-1 Electric Terminal Tensile Testing Machine (300 kg / 3000 N Capacity)

EW-2510-1 Electric Terminal Tensile Testing Machine (300 kg / 3000 N Capacity)

Model:EW-2510-1 Rated load:≤300KG Precision:±0.04KG Function:Wire pulling force tester Power:AC220V/50HZ 0.1KW...

MORE

EW-2510-2 Electric terminal tensile testing machine(100KGS)

EW-2510-2 Electric terminal tensile testing machine(100KGS)

Model:EW-2510-2 Weight:14Kg Safety Cover:Yes Emergency Stop Button:Yes Dimension:430*180*210(mm)...

MORE

EW-2515 Wire Harness Color Sequence Detector (0.02s Automatic Inspection)

EW-2515 Wire Harness Color Sequence Detector (0.02s Automatic Inspection)

Model:EW-2515 Weight:9kg Power:35W Detection speed:0.02s/pcs Dimension:42.5X25.5X40.5CM...

MORE

EW-2520 Double line sequence detector

EW-2520 Double line sequence detector

Model:EW-2520 Power:35 Detection time:Within0.2S Camera parameters:1280*1024;60fps;COMS Lens parameters:Megapixel;75mm F1.4...

MORE

EW-2525 Crimping Force Monitor (CFM) for Crimp Quality Control System

EW-2525 Crimping Force Monitor (CFM) for Crimp Quality Control System

Model:EW-2525 Inputs:1 Outputs:2 Supply voltage:100-240V(50-60Hz) Communications:USB...

MORE

EW-2530 Crimp monitors

EW-2530 Crimp monitors

Model:EW-2530 Enter:Trigger signal Channel number:1CH;2CH Communication:USB 1ch(Built-in 232 port converted to USB) Measurement interval:0.4 seconds ...

MORE

EW-2535 Portable Terminal Cross Section Analyzer (0.13–6.00 mm² Measuring Range)

EW-2535 Portable Terminal Cross Section Analyzer (0.13–6.00 mm² Measuring Range)

Model:EW-2535 Cutting speed:2mm/s Inner diameter:21.7mm outer diameter:105mm Measuring range:0.13 mm2 - 6.00 mm2...

MORE

EW-2540 Precision Terminal Cross Section Analyzer (0.01–120 mm²)

EW-2540 Precision Terminal Cross Section Analyzer (0.01–120 mm²)

Model：EW-2540 Measuring range：0.01-120mm2 Metallographic sandpaper：1200# Cutting speed：0-4000rpm (Speed adjustable) Grinding speed：0-4000rpm(Speed adjustabl...

MORE

EW-2545 Electric Terminal Tension Tester (5–1000N)

EW-2545 Electric Terminal Tension Tester (5–1000N)

Model:EW-2545 Accuracy:±1% Stock:60 mm Measuring range:5-1000N/ 0.5- 100kg Measuring speed:Max 500mm/min...

MORE

EW-2550 Terminal height measuring instrument

EW-2550 Terminal height measuring instrument

Model:EW-2550 Accuracy:±0.1% Air source:0.4-0.6MPa Measuring range:0-10mm Communication mode:RS232...

MORE

EW-2555 Fully Automatic Terminal Cross-Section Analyzer (30–312X / 0.01–70mm²)

EW-2555 Fully Automatic Terminal Cross-Section Analyzer (30–312X / 0.01–70mm²)

Model:EW-2555 Total video magnification:30~312X Power supply:100~240VAC, 50/60Hz Applicable wire range:0.01~70mm2（120mm2 can be customized) Terminal section...

MORE

EW-2560 Fully Automatic terminal cross section analyze

EW-2560 Fully Automatic terminal cross section analyze

Model:EW-2560 Control System:Japanese Mitsubishi PLC controller room Cutting speed:0-2800 rpm (using German ABB motor) Grinding speed:0-2800 rpm (using Germa...

MORE

EW-2565 Crimp Force Monitor(Ethernet UDP 1/2-Channel IO Trigger)

EW-2565 Crimp Force Monitor(Ethernet UDP 1/2-Channel IO Trigger)

Model:EW-2565 Power:24VDC±10% Chanel:1 output/ 2 output Operating temperature:0℃~50℃ Communication:Ethernet communication, supports UDP protocol. USB port,...

MORE

EW-2580 Electric intelligent pull tester(Industrial version)

EW-2580 Electric intelligent pull tester(Industrial version)

Model:EW-2580 Accuracy:±1% Stock:70 mm Measuring range:20-1000N Measuring speed:20/50/100/150mm/min...

MORE

EW-2585 Terminal tensile testing machine

EW-2585 Terminal tensile testing machine

Model:EW-2585 Test range: 0-980N Resolution: 0.01 N Device Accuracy: precision grade 0.05% Traction speed: 25/50/100mm/min, also can be set by yourself ...

MORE

<< Prev Page 1 2 3 Next Page >> Total:38Records Current 1Page,Total 3Page,| Go Page

Talk to EASTONTECH

We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!

86+13758776836

info@ew-wirestripping.com

Messenger

wxin