Wire Stripping and Twisting Machines

Eastontech's wire-stripping and twisting machine range covers two complementary processes used in the preparation of coaxial and shielded cables. The rotary stripping line removes up to 9 cable layers (jacket, shield braid, foil, dielectric) in a single setup across a wide diameter span — from fine RF coaxial cable (OD 0.4mm) to heavy power and signal cable (OD 50mm) — using a motor-driven rotary cutter frame that cuts evenly around the cable circumference rather than pressing inward from one direction. The conductor twisting line consolidates stripped wire strands into a tight, uniform bundle before crimping or connector insertion, available as a dedicated digital twisting machine or integrated into combined strip-and-fold-back equipment for shielded cable end preparation. Models are organised into Electrical (motor-driven) and Pneumatic (air-driven) sub-categories — use the category filter to narrow by drive type, or browse the full range below. All models are CE and ISO 9001 certified, manufactured in Ruian, Zhejiang, since 2003.

High-Precision Air-Driven Cable Stripping Machine(AWG32–14 / 0.03–2.08mm²)

High-Precision Air-Driven Cable Stripping Machine(AWG32–14 / 0.03–2.08mm²)

Multi-Layer Rotary Coaxial & Power Cable Stripping Machine (3–30 mm OD)

Multi-Layer Rotary Coaxial & Power Cable Stripping Machine (3–30 mm OD)

High-Precision Programmable Coaxial and Sheathed Cable Stripping Machine

High-Precision Programmable Coaxial and Sheathed Cable Stripping Machine

High-Precision Coaxial Cable Stripping Machine (OD 0.81–7.5 mm / Max 9 Layers)

High-Precision Coaxial Cable Stripping Machine (OD 0.81–7.5 mm / Max 9 Layers)

Automatic Rotary Wire Stripping Machine (OD 10–50mm)

Automatic Rotary Wire Stripping Machine (OD 10–50mm)

Product Category: Cut; Crimp - Pneumatic - Electrical (0-4T) - Electrical (6-40T) - Strip Crimp - Seal Crimp; Cut&Strip - 0-35mm² - 50-400mm² - Rotary Strip - Bend - Inkjet/Laser Mark; Shield Process; Strip,Twist - Electrical - Pneumatic; Cut Strip Terminate& Solder - Housing/Tube Insertion - Seal Crimping - Heat Shrinkage/Sleeve Insertion - Tinning Crimping - Joint Crimping - Ferrule Crimping - Standard Crimping; Labeling Machine; Wind & Nylon Tying; Cable Solder& Weld Machine; Tape Bundling; Prefeeding& Deposit System; Plug Production; Heat Shrinkage; PVC Injection; Copper Belt Press; Tape Dispenser; Printing Marking; Wire Harness Tester & Assembly Table; Solar Cable Line; Moulds&Accessory

New information: Seal Crimping vs Standard Crimping: When Do You Need a Wire Seal?
2026/10/14 | News > Wire Harness Industry Blog; IPC/WHMA-A-620 Revision F: Classes, Scope and Manufacturer Checklist
2026/10/9 | News > Wire Harness Industry Blog; Changing A Terminal in Production: What to Check on Your Crimping Applicator First
2026/10/7 | News > Company News; Ultrasonic Wire Welding vs Soldering: Which Wire Joining Method Fits Your Application?
2026/9/29 | News > Wire Harness Industry Blog; Medical Device Wire Harness: Manufacturing Requirements, Equipment & Quality
2026/9/23 | News > Wire Harness Industry Blog; Rotary Stripping Machine vs Standard Cut & Strip: Which One Fits Your Cable?
2026/9/16 | News > Wire Harness Industry Blog; Wire Stripping Tolerance: How Accuracy Affects Wire Processing Quality
2026/9/9 | News > Wire Harness Industry Blog; Wire Harness Automation for Automotive Wiring: A Practical Guide
2026/9/2 | News > Wire Harness Industry Blog

EW-10 3F Pneumatic Wire Stripping & Twisting Machine (AWG16-AWG22)(hot/cold blades)

EW-10 3F Pneumatic Wire Stripping & Twisting Machine (AWG16-AWG22)(hot/cold blades)

Model:EW-10 3F Power supply:AC110V/220V /50HZ/60HZ Pressure:5-7kgs Max.stripping length:20mm Weight:10KGS Dimension:260mm*150mm*270mm...

MORE

EW-10 4F Pneumatic Wire Stripping Machine AWG18-AWG32(hot/cold blades)

EW-10 4F Pneumatic Wire Stripping Machine AWG18-AWG32(hot/cold blades)

Model:EW-10 4F Power supply:AC220V/50HZ Pressure:5-7KGS Max.stripping length:25mm Weight:18KG Dimension:320mm*300mm*400mm...

MORE

EW-1025 Wire Looping Machine (1–10 mm²)

EW-1025 Wire Looping Machine (1–10 mm²)

Model: EW-1025 Conductor cross-section: 1 - 10 mm2 Loop inner diameter: 6 / 8 / 10 / 12 mm ...

MORE

EW-1040 Automatic Ethernet Cable Twisted Pair Wire Separating and Straightening Machine (AWG 18–32)

EW-1040 Automatic Ethernet Cable Twisted Pair Wire Separating and Straightening Machine (AWG 18–32)

Model:EW-1040 Wire range:AWG18-AWG32 Twisting length:10-80mm Air pressure:0.5-4Mpa Power supply;220V/110V/50HZ/60HZ Power:100W Weight:13KGS...

MORE

EW-1055 Multi-core Long and Short Wire Stripping Machine

EW-1055 Multi-core Long and Short Wire Stripping Machine

Model:EW-1055 Wire range:AWG24-16 Stripping length:1-15mm Length of wire drop:0-400mm Speed:1400pcs/hour(3 core length drop 40mm)...

MORE

EW-1070 Multi-size Wire Stripping Machine

EW-1070 Multi-size Wire Stripping Machine

Model:EW-1070 Wire range:0.75-95mm2 Stripping length:6-30mm Combination of specification:4-5 kinds Stroke:30mm Air pressure:0.5-0.7Mpa...

MORE

EW-1075-1 Peumatic Wire Stripping Machine(0-7mm) Free of Blades Adjustment

EW-1075-1 Peumatic Wire Stripping Machine(0-7mm) Free of Blades Adjustment

Model:EW-1075-1 Wire range:0.5-25mm2 Stripping length:3-60mm Productivity:1500-2000pcs/hour Air pressure:0.5-0.7Mpa...

MORE

EW-1085 Electric Wire Stripping Machine

EW-1085 Electric Wire Stripping Machine

Model:EW-1085 Wire range:0.5-8mm2 Precision :0.01mm Stripping length:0.1-25mm Air pressure:0.5-0.7Mpa Dimension :350*300*400mm Weight:30KGS Power suppl...

MORE

EW-1090 Compact Electric Wire Stripping Machine (0.03–4 mm² / 0.01 mm Precision)

EW-1090 Compact Electric Wire Stripping Machine (0.03–4 mm² / 0.01 mm Precision)

Model:EW-1090 Max. Stripping length:20mm Diameter setting accuracy:0.01mm Processing time:2pcs/s Available cross section:0.03-4mm2 Weight:4.5KGS...

MORE

EW-10MT High-Precision Air-Driven Cable Stripping Machine(AWG32–14 / 0.03–2.08mm²)

EW-10MT High-Precision Air-Driven Cable Stripping Machine(AWG32–14 / 0.03–2.08mm²)

Model：EW-10MT Max. Outer Cable Diameter: 3.2mm Stripping Length Increments: Full strip: 0.5mm Partial strip: 2mm Precision of Diameter Setting: 0.01mm M...

MORE

EW-10MT-1 Pneumatic Cable Stripping Machine 0.03 – 4mm2 (AWG32 – AWG11)

EW-10MT-1 Pneumatic Cable Stripping Machine 0.03 – 4mm2 (AWG32 – AWG11)

Model：EW-10MT-1 Max. Outer Cable Diameter: 5.0mm Wire Size Range: 0.03 – 4 mm² (32 – 11 AWG) Stripping Length Increments: Half strip: 0.5mm; Full stri...

MORE

EW-10ST-1 Cable Wire Stripping and Twisting Machine AWG22-AWG14

EW-10ST-1 Cable Wire Stripping and Twisting Machine AWG22-AWG14

Model:EW-10ST-1 Wire range:AWG22-AWG14 Stripping twisting wire diameter: 1-3mm Stripping and twisting length: 3.5-25mm Speed:0.5-2s each time Weight:18KG...

MORE

EW-10ST-2 Desktop Cable Stripping and Twisting Machine (AWG 26–10)

EW-10ST-2 Desktop Cable Stripping and Twisting Machine (AWG 26–10)

Model:EW-10ST-2 Available Wire Size:AWG10-AWG26 Stripping lengths:3-45mm Twisting length:3-45mm Speed:0.5-2s each time ...

MORE

EW-10ST-2A Cable Stripping and Twisting Machine with Wire Positioner AWG26-AWG10

EW-10ST-2A Cable Stripping and Twisting Machine with Wire Positioner AWG26-AWG10

Model:EW-10ST-2A Wire range:AWG26-AWG10 Twisting length:3-45mm Stripping length:3-45mm Speed:0.5-2s each time ...

MORE

EW-10UT Series Heavy-Duty Automatic Rotary Wire Stripping Machine (10–50 mm)

EW-10UT Series Heavy-Duty Automatic Rotary Wire Stripping Machine (10–50 mm)

Model：EW-10UT-1 Wire dia.：10-25 mm Stripping lengths：0-100mm Stripping mode：Rotary stripping Air input ：0.5-0.7mpa Length accuracy：±(0.002*L)mm Productiv...

MORE

EW-10UT-3 Automatic Rotary Wire Stripping Machine (OD 10–50mm)

EW-10UT-3 Automatic Rotary Wire Stripping Machine (OD 10–50mm)

Model :EW-10UT-3 Wire diameter:10-50mm Stripping lengths:0-300mm Stripping mode:Rotary stripping Air pressure:0.5-0.7mpa Length accuracy:±(0.002*...

MORE

EW-10UT-5 Automatic Rotary Wire Stripping Machine (OD 12–50mm)

EW-10UT-5 Automatic Rotary Wire Stripping Machine (OD 12–50mm)

Model :EW-10UT-5 Wire diameter:12-50mm Stripping lengths:0-500mm Stripping mode:Rotary stripping Air pressure:0.5-0.7mpa Length accuracy:±(0.002*...

MORE

EW-10WT-2 Cable Shield Braid Twisting Machine with positioning clamp

EW-10WT-2 Cable Shield Braid Twisting Machine with positioning clamp

Model:EW-10WT-2 Air pressure:1.5-2.5kg/CM2 Motor power:10W Speed 1400 rpm Twist length:5-80mm (customizable to 200mm) Twist range:0.1-2mm2 Power supply:2...

MORE

<< Prev Page 1 2 3 4 Next Page >> Total:61Records Current 2Page,Total 4Page,| Go Page

Talk to EASTONTECH

We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!

86+13758776836

info@ew-wirestripping.com

Messenger

wxin