Talk to EASTONTECH
We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!
| Model | EW-1215R |
| Cutting length | 20-100000mm |
| Applicable width | 1-95mm |
| Cutting speed | 90pcs/min (length=50mm) |
| Max. temperature of knife | 300℃ |
| Power supply | 220/110V/60/50HZ |
| Power | 0.66KW |
| Dimension (L*W*H) | 560*420*405mm |
| Weight | 24/29 (net/gross) |
● Hot Cutting Mode — Cut and Seal Synthetic Webbing in One Pass
When processing polyester, nylon, and other synthetic belt loop and webbing materials, the EW-1215R's hot cutting mode heats the blade to up to 300°C, melting and fusing the cut edge as the blade passes through the material. This eliminates the fraying and loose fibre ends that occur with cold-blade cutting on synthetic woven materials — producing a clean, sealed edge that requires no secondary edge-finishing step (such as heat sealing or overlocking) before the belt loop or webbing piece is sewn into the finished garment or accessory.
● Cold Cutting Mode for Natural Fibre and Heat-Sensitive Materials
For cotton, canvas, and other natural fibre webbing or tape materials where heat sealing is unnecessary or would damage the material, the machine switches to cold cutting mode — using blade pressure alone without heating. This dual-mode capability on a single machine covers both synthetic and natural fibre material types without requiring separate dedicated cutting equipment for each material category.
● Stepper Motor Precision at 90 Pieces Per Minute
Cutting length and feed positioning are controlled by a stepper motor, maintaining consistent cut-length accuracy across the full 20mm–100,000mm programmable range at a throughput of 90 pieces per minute (50mm cut length). The cutting length, batch quantity, and cutting speed are stored in memory before shutdown and automatically recalled on restart — eliminating the need to re-enter parameters for repeat production runs of the same belt loop specification.
● Automatic Pause on Material Run-Out
The machine automatically stops when the source material roll is fully consumed, preventing the machine from running an empty or partial cycle and alerting the operator to reload material before the next batch — reducing waste and unplanned production gaps on unattended or lightly-supervised cutting stations.
Garment belt loop and waistband tape cutting
Belt loops for trousers, jeans, and skirts are typically cut from polyester or nylon webbing in widths of 10–25mm, where a heat-sealed edge prevents fraying through repeated wash cycles. The EW-1215R's hot cutting mode at up to 300°C produces this sealed edge in the same cycle as the length cut, eliminating the separate heat-sealing step common on garment accessory production lines using cold-cut belt loop material.
Webbing tape and strap cutting for bags and luggage
Backpack straps, bag handles, and luggage webbing — typically 20–50mm nylon or polypropylene webbing — require clean, sealed cut ends to prevent unravelling during the high-stress use these products are subjected to. The machine's 1–95mm width range covers the full webbing width spectrum used in bag and luggage accessory manufacturing.
Elastic band and trim cutting
Elastic waistbands, cuff trims, and garment finishing tapes are cut to length for ready-to-sew component kitting. The cold cutting mode is typically used for elastic materials where heat exposure can degrade the elastomeric fibres, while the stepper motor precision ensures consistent component length across large production batches.
Industrial strap and tie-down webbing
Cargo tie-down straps, automotive seatbelt webbing offcuts, and industrial securing straps in the 25–50mm range benefit from the hot-sealed edge produced by the EW-1215R, which prevents the synthetic webbing from unravelling under the tension and abrasion these products experience in service.
Q: What is the difference between hot cutting and cold cutting mode on this machine?
A: Hot cutting mode heats the cutting blade to up to 300°C, which melts and seals the cut edge of synthetic materials (polyester, nylon, polypropylene) as the cut is made — preventing the fraying that would otherwise require a separate edge-sealing step. Cold cutting mode cuts without heating the blade, used for natural fibre materials (cotton, canvas) and heat-sensitive elastic materials where heat exposure would damage or degrade the material. The EW-1215R switches between modes based on the material being processed; the mode selection does not require a different blade, only a change in the blade heating setting.
Q: What materials and widths can this machine process?
A: The machine handles belt loop tape, webbing, ribbon, and elastic band material with widths from 1mm to 95mm and cutting lengths from 20mm to 100,000mm. Compatible materials include polyester webbing, nylon webbing, cotton tape, canvas strap material, and elastic band — covering the range of garment accessory and bag/luggage strap materials typically processed on belt loop cutting equipment.
Q: What is the production speed, and how is it affected by cut length?
A: At a cut length of 50mm, the EW-1215R achieves 90 pieces per minute. Throughput will be somewhat lower for longer cut lengths (since more material must feed through per cycle) and can be higher for very short cut lengths, within the mechanical limits of the stepper-motor feed system. The machine's memory function retains the cutting length, batch quantity, and speed settings between power cycles, so repeat production runs do not require re-entering parameters.
Q: Does the machine stop automatically when the material roll runs out?
A: Yes. The EW-1215R includes an automatic pause function that detects when the source material has been fully consumed and stops the machine before it attempts to cut on an empty feed — preventing wasted cycles and alerting the operator that the material roll needs to be replaced before production resumes.
Talk to EASTONTECH
We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!
