Talk to EASTONTECH
We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!
|
Model |
EW-9045 |
|||
|
Injection injection |
Screw Diameter |
mm |
26 32 36 |
|
|
Injection Pressure |
kg/cm2 |
2073 1373 1145 |
||
|
Max Shot Weight |
g |
68 104 132 |
||
|
Injection Rate |
mm |
130 |
||
|
Screw Speed Max |
Turn |
0-260 |
||
|
Nozzle Retraction |
mm |
165 |
||
|
Number of temperature Control |
Snt |
3/4 |
||
|
Clamping unit |
Clamping Force |
tons |
45 |
|
|
Platen Size |
mm |
620*430 |
||
|
Distance Between Tie Bar |
mm |
425*245 |
||
|
Min Mold Height |
mm |
100/150 |
||
|
Opening Stroke |
mm |
200 |
||
|
Max Open Daylight |
mm |
300/350 |
||
|
Ejector Force |
tons |
2 |
||
|
Power Heading unit |
kg/cm2 |
140 |
||
|
Pump Output |
L /min |
41 |
||
|
Pump Motor power |
kw/HP |
5.5/7.5HP |
||
|
Berrel Heating Power |
kw |
3.2 |
||
|
Total Weight |
KW |
8.7 |
||
|
Other |
Machine Weight |
Kg |
1050 |
|
|
Machine Dimension |
m |
1.7*1.2*3.3 |
||
|
Air input |
N/A |
|||
|
Pedal control |
N/A |
|||
● Fixed Lower Die Vertical Clamping: Gravity keeps metal pins, terminals, and cables perfectly positioned in the lower stationary mold, preventing insert displacement and mold damage.
● Servo Energy-Saving System (30%–80% Power Savings):High-response servo motor dynamically adjusts hydraulic output to load demand, drastically reducing electricity costs and oil thermal degradation.
● Low-Pressure Mold & Operator Protection:Integrated safety sensor instantly halts mold closure if resistance or foreign objects are detected, preserving delicate tooling and operator safety.
● Modular Expandability (Sliding & Rotary Tables):Easily configurable with single/double shuttle sliding plates or rotary indexing tables to enable loading/unloading while the machine is molding.
● Wire Harness Overmolding: Strain reliefs, AC/DC power supply plugs, USB connectors, and waterproof automotive wiring grommets.
● Automotive Electronics:Sensors, relay housings, switch components, and metal-insert busbars.
● Medical Device Assembly: Surgical instrument handles, catheter hubs, and precision plastic-to-metal subassemblies.
● Precision Industrial Components: Overmolded threaded brass inserts, knobs, switches, and electronic hardware housings.
Q1: Why is a vertical fixed-lower-die design superior for cable and terminal insert molding?
A: On horizontal machines, gravity pulls inserts down, making loading awkward and causing inserts to fall out of position during mold closure. The EW-9045's fixed lower die allows operators to place terminals or cables vertically into the mold where gravity keeps them firmly seated, eliminating insert movement and pin breakage.
Q2: How does the servo system save up to 80% on electrical power?
A: Traditional hydraulic motors run continuously at full power even during holding, cooling, and manual loading phases. The EW-9045's servo system only consumes power when hydraulic motion is required, virtually idling during cooling and load/unload cycles to dramatically cut electricity costs.
Q3: Can the EW-9045 be upgraded with sliding or rotary tables?
A: Yes. The base machine can be retrofitted with single-slide, double-slide, or multi-station rotary tables. This allows an operator to load new inserts into an external mold plate while the internal mold is actively injecting and cooling, doubling production output safely.
Talk to EASTONTECH
We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!
