|
Model |
EW-9355 |
|
Function |
A-end: stripping, tinning B-end: stripping, crimping, CCD detection, shell penetration |
|
Processing range |
AWG18-AWG24 or AWG24-AWG30, up to 8 colors of wire can be used simultaneously |
|
Processing length (exposed wire length after shell penetration) |
980mm≧L≧40mm (Please contact the on-duty salesperson for special needs) |
|
Cutting accuracy |
0.5mm+cutting length*0.2% |
|
Stripping length |
A-end Max10.0mm B-end Max6.0mm |
|
Twisted wire length |
3mm-10mm |
|
Crimping capacity |
2T |
|
Maximum number of PINs |
20 holes per row, maximum 3 rows |
|
Maximum number of colors |
8 colors (more colors can be customized) |
|
Shell size |
MAX:40*21*18 (center height of the top row of holes in the plastic shell is Max14.5) MIN:5*6*3 spacing 1.0-4.2mm |
|
Maximum operating speed |
When the length of the glue line is less than 200, 1.7 seconds per piece (after a finished product is completed, the automatic shell change and loading time is 0.6S, and the specific production capacity will fluctuate and decrease according to different materials and requirements) |
|
Detection device |
Terminal appearance CCD, terminal presence, plug shell back pull detection, rubber seat presence, production defect rate can be set |
|
Standard components |
8-axis reel-loading universal wire feeding machine |
|
Standard |
Single-channel terminal pressure monitoring Single-lens CCD visual inspection |
|
Power supply |
220V/110V,50Hz/60Hz |
|
Maximum Power |
4.8KW |
|
Air pressure |
0.4-0.6MPa |
|
Machine weight |
About 750kg |
|
Dimensions |
2200L*1650W*1850H (excluding wire feeding machine and vibration plate, the size of non-standard machine shall be subject to the actual machine) |
|
Loading method |
The vibrating plate automatically feeds the plastic shell, the wire feeder automatically feeds the wire, and the motor automatically feeds the tin wire and tin water |
