Automatic Wire Cutting & Stripping Machine (0.1–6.0mm² )

● Automotive wire harness manufacturing

The 0.1–6.0mm² range covers the signal and sensor wiring gauges (AWG28–AWG18) most commonly used in body, infotainment, and ADAS sub-harnesses. At 3,000–5,000 pcs/h, a single EW-02A+ replaces manual stripping on a full shift's worth of fine-gauge wire output.

● Electronic component & PCB assembly

Board-to-board and wire-to-board connections in consumer electronics and industrial PCB assemblies use fine-gauge wire (AWG28–AWG22 / 0.1–0.5mm²) where consistent strip length and zero conductor nicking are mandatory. The 4-roller drive and stainless steel blades maintain both requirements across high-volume batches.

● Home appliance production

Internal wiring of motors, heating elements, and control boards in appliances typically falls in the AWG18–AWG14 / 0.75–2.5mm² range. The machine's compatibility with PVC, Teflon, and fibreglass insulation covers the full insulation variety used across appliance wiring designs.

● Communication & data cable processing

Instrument cables, data communication wires, and sensor leads in AWG24–AWG20 gauges are common in ICT and industrial automation. The asymmetric stripping capability (Side I: 0–25mm, Side II: 0–60mm) accommodates the different lead lengths required on each end of communication cable assemblies.

● Small to medium wire processing factories

For general-purpose wire processing operations requiring a reliable, low-infrastructure machine deployable without compressed air, the EW-02A+'s compact 465×465×350mm footprint and 31kg weight make it repositionable between workstations without mechanical handling equipment.

Q: What wire types and sizes does the EW-02A+ wire stripping machine support?

A: The EW-02A+ handles conductor cross-sections from 0.1 to 6.0mm² (AWG28–10), compatible with PVC, Teflon, fibreglass, and other standard insulation materials. The maximum guide tube diameter is 7mm. Cutting length is adjustable from 1mm to 99,999.99mm, with stripping length from 0–25mm on Side I and 0–60mm on Side II.

Q: Does this machine require an air compressor?

A: No. The EW-02A+ is a fully electrical machine operating on AC110V or AC220V at 350W. It has no pneumatic components, so no compressed air supply or compressor installation is needed — making it suitable for workshops and small production facilities without existing compressed air infrastructure.

Q: What is the production speed and cutting accuracy of this machine?

A: Under standard operating conditions it achieves 3,000–5,000 pieces per hour, with a cutting length tolerance of less than 0.002×L (for example, a 500mm cut is accurate to within ±1mm). Noise output during operation is below 55dB(A), which falls within standard occupational noise limits for open-plan production environments.

Q: What makes the 4-roller drive system important for wire stripping quality?

A: A 4-roller drive system distributes clamping and feed force symmetrically around the wire, maintaining consistent contact regardless of minor wire diameter variation within a batch. This prevents the slippage and feed-length errors that 2-roller systems produce on soft-jacket insulation materials like Teflon or fibreglass, where grip is harder to maintain. For fine-gauge wires (0.1–0.5mm²), consistent feed force is the primary determinant of strip length accuracy.