EW-05F+T Multi-Conductor Cable Cutting, Stripping & Twisting Machine-EASTONTECH
Close
Close

Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)

5084
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Model:Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)
Share to:
Model:  EW-05F+T
Function:  Cut,  Strip  &  Twist
Conductor  cross-section:  0.75  -  30  mm2  
Core  wire  stripping:  2  -  10  cores
Cutting  length:  1  -  99999.9  mm

Technical Data

Model

EW-05F+T

 
Machine Category Multi-Conductor Cable Cut, Strip & Twisting Machine  

Conductor cross-section

0.75 - 30 mm²

Function

Cut, Strip & Twist

Twist Stroke Length Up to 120 mm
Applicable Cable Types Single Core, Multi-Conductor, Sheathed & PVC Cables
Inner Core Wire Capacity

2-10 cores

 

Cutting length

1 - 999,999.9 mm

Cutting length tolerance

< 0.002 * L (L = cutting length) 

Stripping length (side I) 

Cable jacket

- Full strip: 10 - 200 mm

- Half strip: 1 - 800 mm

 

Core wire

- Full strip: 1 - 50 mm 

- Half strip: 5 - 200 mm 

 

Stripping length (side II) 

Cable jacket

- Full strip: 10 - 80 mm

- Half strip: 1 - 300 mm

 

Core wire

- Full strip: 1 - 50 mm    

- Half strip: 5 - 80 mm 

 
Maximum Guide Tube Diameter

18 mm

Productivity 

2000 pcs./h

900 pcs./h (multi-conductor cable) 

 

Blade material

Imported high speed steel

Display mode 

7-inch touch screen 

Driving mode 

Servo motor cutting with 16 roller driving system

Feeding mode 

Belts feeding with pressure stripping function.

Roller Gap

Digital program control

Power supply

110, 220 V (50 - 60 Hz)

Power

1.1 kW

Compressed air connection

0.5 - 0.7 MPa

Weight 

100 kg  

Dimension

680 * 605 * 520 mm

Remarks 

Custom options by sending samples

Feature

● Heavy-Duty Multi-Core Processing (0.75–30 mm² / 2–10 Cores): Efficiently cuts, strips, and twists large cross-section multi-conductor jacketed cables and single wires up to 30 mm² without manual prep.

● 16-Roller Belt Drive System (Zero Scratch Mark Guarantee):Advanced belt feeding with 16 synchronized rollers distributes pressure evenly, delivering high feeding force without pinching or scratching soft insulation jackets.

● Integrated Core Wire Twisting Unit (120 mm Twist Stroke):Automatically pulls off inner core insulation and tightly twists exposed copper strands across a stroke up to 120 mm, preventing frayed wire ends before soldering or crimping.

● Digital PLC Touchscreen Roller Gap Control:Roller gaps and drive pressures adjust automatically through the 7-inch touchscreen interface, eliminating manual mechanical hand-wheel adjustments during batch changeovers.

● High-Precision Servo Cutting & Uni-V/Flat Blades:High-torque servo drive paired with imported high-speed steel (HSS) Uni-V jacket blades and Uni-flat core blades ensures repeatable cutting accuracy (< 0.002 * L).

● Flexible Modular Expansion:Supports optional add-ons including motorized wire pre-feeders, middle/window stripping modules, conveyor stackers, wire coilers, ink-jet printers, and Industrial Control Systems (ICS).

Application Range

The EW-05F+T multi-conductor cable cut, strip and twist machine is deployed across industries where high-volume, multi-core cable end preparation demands consistent quality and throughput:
Industrial control & automation wiring — Processes the 4–12 core control cables (0.75–2.5mm² per core) used in PLC panel wiring, servo drive cabling, and industrial robot arm harnesses, where clean, twisted conductor ends are required for push-in terminal block or ferrule termination.
Automotive wire harness manufacturing — Handles the sheathed multi-conductor cables used in door modules, seat wiring, instrument cluster harnesses, and EV BMS communication cables, supporting Tier 1 and Tier 2 production lines with flexible length programming to accommodate model-specific cut lists.
Building automation & elevator systems — Suited for the multi-conductor signal and power cables used in lift control wiring, fire alarm loops, and access control systems, where consistent strip lengths and twisted copper ends are required for screw-terminal or IDC connector termination.
Renewable energy & solar installations — Processes the multi-core DC string cables and monitoring cables used in utility-scale solar PV installations, where field-preparation consistency and high volume throughput reduce installation labor costs.
Appliance & consumer electronics manufacturing — Handles the flexible PVC multi-core power and signal cables used in white goods (washing machines, HVAC units, dishwashers) where consistent end preparation enables automated insertion into PCB connector housings at assembly line speed.

FAQ

Q1: How does the belt feeding system on the EW-05F+T prevent wire insulation damage?

A: Instead of narrow metal rollers that press and indent cable jackets, the EW-05F+T uses a 16-roller belt feeding mechanism. The extended surface contact distributes pulling force evenly across the cable, guaranteeing zero scratch marks or jacket distortion during feeding and stripping.

Q2: Can the EW-05F+T twist individual inner core conductors after stripping?

A: Yes. The integrated twisting unit pulls off the inner core insulation and tightly twists the exposed copper strands across a stroke up to 120 mm, preparing multi-core wires up to 10 cores for seamless soldering or terminal crimping.

Q3: How are roller gap and roller pressure adjusted when changing cable diameters?

A: Roller gaps and drive pressures are digitally controlled via the 7-inch PLC touchscreen interface. Operators simply input the cable diameter into the program, and the machine automatically adjusts the 16-roller gap without manual hand-wheel tuning.

Model:Multi-Conductor Cable Cutting, Stripping & Twisting Machine (0.75–30 mm² / 16-Roller Servo Drive)

Scan the QR code

Share to:
Model:  EW-05F+T
Function:  Cut,  Strip  &  Twist
Conductor  cross-section:  0.75  -  30  mm2  
Core  wire  stripping:  2  -  10  cores
Cutting  length:  1  -  99999.9  mm

Talk to EASTONTECH

We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!

86+13758776836

info@ew-wirestripping.com

Messenger
Messenger
wxin
whatsapp