EW-06H-4 Automatic Coaxial Cable Cutting & Stripping Machine-EASTONTECH
Close
Close

Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)

7246
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Model:Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)
Share to:
Model:  EW-06H-4
Cable  OD:  0.64  -  4.0  mm
Cutting  length:  22  -  9999  mm
Cutting  depth  increment:  0.01  mm
Cutting  tolerance:<  0.01  *  L

Technical Data

Model EW-06H-4
Cable outer diameter 0.64 - 4 mm
Outer diameter increment 0.01 mm Precision Control
Cutting Length Range 50 - 9,999 mm
Stripping length (side I) 0 - 45 mm
Stripping length (side II) 0 - 200 mm
Stripping length increment 0.01 mm
Maximum stripping steps Up to 6 Layers
Production Productivity Rate 750 - 1300 pcs./h
Memory Capacity Storage 100 Cable Recipe Profiles (Touchscreen Interface)
Applicable Cable Types RF Coaxial, ICT, UL3135 Silicone, Medical, Automotive Wire
Power supply 110, 220 V (50 - 60 Hz)
Power 700 W
Weight 100 kg
Dimension 760 * 700 * 400 mm

Feature

● 6-Layer Multi-Step Precision Stripping: Cleans outer jackets, metallic shielding braids, dielectric insulation, and core conductors in one synchronized, automated sequence.

● Micro-Incremental Depth Precision (0.01 mm):Blade depth and position adjust in ultra-fine 0.01 mm increments to guarantee clean jacket removal without scoring delicate conductor wires or inner shielding.

● Broad Cable & Wire Compatibility (0.64–4.0 mm OD): Purpose-built for RF coaxial leads, ICT cables, UL3135 silicone rubber insulated wires, high-elasticity leads, and medical probe wiring.

● Universal High-Precision Blade System:Specially ground universal blade set processes a wide spectrum of coaxial and hook-up wire insulation materials without requiring frequent blade swaps.

● 100-Recipe Touchscreen Storage:Digital touch control interface allows operators to store and recall up to 100 processing profiles for instant job changeovers.

● Asymmetric Extended Strip Lengths:Supports up to 45 mm stripping on Side I and up to 200 mm on Side II, accommodating long breakout and connector assembly specifications.

Application Range

● RF & Telecommunication Cabling:High-precision stripping for SMA, SMB, BNC coaxial cable assemblies, and cellular antenna jumpers.

● Medical Electronics & Diagnostic Wires: Micro-coaxial wire processing for ultrasonic probes, endoscopes, and patient monitoring leads.

● Automotive & High-Frequency Sensors: High-frequency GPS/camera coaxial leads, radar sensor wiring, and silicone hook-up wires.

● ICT & Industrial Electronics:UL3135 silicone rubber insulated wiring, flexible high-elasticity leads, and communication jumpers.

FAQ

Q1: Why is 0.01 mm depth precision critical for coaxial cable stripping?

A: Coaxial cables rely on precise physical geometry to maintain signal impedance. Even a minor nick in the dielectric layer or braided shield causes attenuation and signal loss. The 0.01 mm micro-adjustment allows blades to cleanly cut specific insulation layers without contacting inner conductors.

Q2: Can the EW-06H-4 process silicone rubber insulated wires and elastic medical cables?

A: Yes. Beyond standard RF coaxial cables, the machine's universal blade geometry cleanly cuts soft, gummy insulation materials like UL3135 silicone rubber and high-elasticity medical wires without tearing or dragging the jacket.

Q3: How many stripping layers can be programmed into a single cable recipe?

A: Up to 6 distinct stripping steps can be programmed per cable recipe, allowing full outer jacket, braid, dielectric, and inner conductor stripping in a single automatic sequence.

Model:Automatic Coaxial Cable Cutting & Stripping Machine (0.64–4.0 mm OD)

Scan the QR code

Share to:
Model:  EW-06H-4
Cable  OD:  0.64  -  4.0  mm
Cutting  length:  22  -  9999  mm
Cutting  depth  increment:  0.01  mm
Cutting  tolerance:<  0.01  *  L

Talk to EASTONTECH

We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!

86+13758776836

info@ew-wirestripping.com

Messenger
Messenger
wxin
whatsapp