EW-05H+M Heavy Cable Cutting & Stripping Machine | 2.5-120 mm²-EASTONTECH
Close
Close

Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)

2065
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Model:Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)
Share to:
Model:  EW-05H+M    
Processing  range:  2.5  -  120  mm²  
Cutting  length:  1  -  99999.9  mm
Stripping  length  (side  I):
  Full  strip:  1  -  300  mm
  Half  strip:  1  -  1000  mm
Stripping  length  (side  II):
  Full  strip:  1  -  150  mm
  Half  strip:  1  -  500  mm

Technical Data

Model 

EW-05H+M

Processing range

2.5 - 120 mm²

Cutting length

1 - 99999.9 mm

Cutting length tolerance

< 0.002 * L (L = cutting length)

Maximum guide tube diameter

27 mm

Stripping length (side I) 

Cable jacket

- Full strip: 1 - 300 mm

- Half strip: 1 - 1000 mm

Stripping length (side II) 

Cable jacket

- Full strip: 1 - 150 mm

- Half strip: 1 - 500 mm

Productivity 

2000 pcs./h(Depending on the length of the line)

Compressed air connection

0.5 - 0.8 MPa

Blade material

Imported high speed steel

Display mode 

7-inch touch screen  

Driving mode 

24-wheel driving

Feeding mode 

By belts 

Power supply

110, 220 V (50 - 60 Hz)

Weight 

275kg  

Dimension

1020 * 590 * 1140 mm

Feature

● All-Round Heavy Processing (2.5-120 mm²):Efficiently processes heavy single-core, multi-core, and flat cables up to 120 mm² with a maximum guide tube diameter of 27 mm. It easily handles full stripping, half stripping, and complex middle-splitting/stripping of up to 50 segments in one continuous cycle.

● High Precision & Ultra-Low Scrap Rate:Achieves tight cutting tolerances of ≤0.002*L (where L represents cutting length) for lengths up to 99999.9 mm. It delivers generous front-end half-stripping up to 1000 mm and rear-end half-stripping up to 500 mm to minimize material waste.

● Mark-Free 24-Wheel Belt Drive:Utilizes an advanced 24-wheel belt feeding system with pneumatically pressurized height controls to prevent any surface indentation on delicate insulation. This high-traction belt design extends the system life expectancy by 2 times compared to traditional metal rollers.

● Industrial-Grade Cutting Durability:Powered by robust blades made of imported high-speed steel (HSS) driven by a high-torque servo motor. It processes up to 2000 pieces per hour under a standard 0.5 to 0.8 MPa air connection.

● Smart Touch HMI & Future-Ready Expansion:Features an intuitive 7-inch color touch screen for quick digital adjustments of roller pressure and stripping configurations. The modular design easily integrates with MES systems, IoT networking, inkjet coding printers, and robotic wire take-up units.

Application Range

The EW-05H+M is built for high-demand, heavy-gauge wire processing sectors:

● New Energy Vehicle (EV) Wire Harnesses: Stripping thick high-voltage battery connection cables and charging gun lines.

● Industrial Power Cabinets & Grid Control:Preparing heavy-gauge copper grounding lines, busbars, and distribution connections.

● Photovoltaic (PV) & Wind Energy: Cutting and stripping tough, weather-resistant double-insulated outdoor solar cables.

● Heavy Machine Manufacturing:Processing heavy multi-core control cables and flat cables requiring clean, mid-span jacket removal for branching.

FAQ

Q1: Why is a 24-wheel belt feed system superior to traditional roller feeds for heavy cables?

A: Standard metal or rubber roller feeds concentrate all driving force onto a small, narrow contact point on the cable jacket. When processing heavy-gauge wires, this high localized pressure often leaves deep, permanent indentations, which can compromise the dielectric strength of the insulation. The EW-05H+M's 24-wheel belt drive spreads the gripping force evenly over a massive surface area, providing maximum pulling traction with zero physical damage or cosmetic marks on the wire jacket.

Q2: How does the multi-segment middle stripping function work and what is it used for?

A: Middle stripping, also known as window stripping, involves removing sections of the cable jacket at specific intervals along the wire length without cutting the inner conductor. This is critical for industrial wiring where branch connections, grounding taps, or splicing splices must be made. The EW-05H+M allows you to program up to 50 distinct stripping windows on a single cable, eliminating hours of hazardous manual knife peeling.

Q3: Can this machine be integrated into smart factories and automated production lines?

A: Yes, the EW-05H+M is built with a highly flexible, open modular architecture. It features dedicated communication interfaces that support integration with factory MES (Manufacturing Execution Systems) and Internet of Things (IoT) platforms. Additionally, it can be seamlessly synchronized with inline inkjet coding printers for waste-free, real-time marking, and paired with automatic robotic wire-collecting arms for a completely hands-free production cycle.

Model:Heavy-Duty Cable Cutting & Stripping Machine (2.5-120 mm²)

Scan the QR code

Share to:
Model:  EW-05H+M    
Processing  range:  2.5  -  120  mm²  
Cutting  length:  1  -  99999.9  mm
Stripping  length  (side  I):
  Full  strip:  1  -  300  mm
  Half  strip:  1  -  1000  mm
Stripping  length  (side  II):
  Full  strip:  1  -  150  mm
  Half  strip:  1  -  500  mm

Talk to EASTONTECH

We want to help you find the best option for your business. Tell us your need by filling out the form below and we will contact you as soon as possible!

86+13758776836

info@ew-wirestripping.com

Messenger
Messenger
wxin
whatsapp